The Harmar model SL400 Vantage straight stair lift repairs. Call 866-721-6004 to schedule repairs and service.
AUDIO ALERTS
If your lift does not operate, diagnose the problem by listening to the beeps emitted:
- A long beep when the control switch is pressed indicates the lift is touching an obstruction.
- One beep per second for 30 seconds (after a 30-second delay) indicates the lift has been stopped off the charge station. It is recommended that the lift be immediately moved to a charge station (located at either end of the rail).
- Two beeps every 60 seconds indicates a major fault with the circuit board. Turn the unit off and back on to reset.
- Three beeps every 60 seconds indicate a major fault with the footrest sensor. Turn the unit off and back on to reset.
- Seven beeps every 60 Seconds indicate a major fault with the slow-down switches. Turn the unit off and back on to reset.
- Eight beeps every 60 seconds indicate a major fault with the limit switch. Turn the unit off and back on to reset.
If your lift fails to reset, contact your dealer for service.
